Green Blog

There are quite a number of companies today who don’t just supply home wind generators, but also install them for you, however these can be quite expensive. If you are thinking about installing this renewable energy source in your home and your budget is tight, you may want to think about building a wind generator yourself.

You may not realize it, but building a wind generator yourself could end up only costing you around $100 - $200, rather than thousands and will be a very wise investment indeed. This one small investment in turn could end up saving you thousands of dollars on what you electricity bills would normally be.

What you may also have not discovered until now is that when you are thinking of building a wind generator for your home is that the parts you need can easily be bought online or at your local hardware store. So if you were concerned that getting the parts was going to be difficult then think again.

However, before you do consider building your own wind generator for your home there are certain things you must think about beforehand. Below we look at what these are and if you keep them in mind then you are sure to construct one that will last for many years to come.

Tip 1: The Base - The base of your wind generator should be one that provides enough support on which it can stand. The best material to make the base with is concrete. This will allow the supports of the wind generator to be held in place firmly no matter how strong and fast the wind blows.

Tip 2: The Tower - The tower itself is best made from metal, however you can construct it from plywood, but you need to ensure that you use the thickest plywood possible. This will ensure that the tower is sturdy andcan cope with the effects of wind blowing against it.

Tip 3: The Wind Blades - Make sure that the blades you make or use can move without any hindrance or friction. This in one of the most important parts of your system. In fact, you are far better off purchasing premade quality blades as this will ensure that they create enough energy for your particular needs.

Should you decide to make your own blades you should create them using PVC or plywood. It is important that the size of the blades is in equal proportion to the size of the tower you have constructed. If you make the blades too big then the tower won’t be strong enough to hold them up, whilst if they are too small then they aren’t going to be able to return the levels of energy that you need to power your home.

Tip 4: The Gearbox - When you are thinking of building a wind generator you need to pay close attention to what the gearbox is to be constructed from. If you use inferior quality materials or equipment this can result in the blades being unable to turn as freely as they should and so the amount of energy they produce is reduced. If you decide to buy a gearbox instead of building one, make sure you purchase a complete working gearbox that is specifically designed for installation into wind generator system.

If you’re ready to save thousands and break free from energy dependence go to BuildingaWindGenerator.com for more info related to building a Wind Generator!

If you live in a region where the prevailing winds are regular and relatively strong, then you can probably install a residential wind turbine to save a great deal on your electrical energy costs. A wind turbine can help you to use less power from your local utility company, especially when used in conjunction with photovoltaic cells. Some people living in areas where conditions are ideal have even managed to go completely off the grid! While that’s not possible for most of us, the ability of a wind turbine to turn the kinetic energy of wind into the electrical power you need for your home can save you a substantial amount of money on your energy bills.

Most homes which use residential wind power also draw electricity from their local utility company as well. If wind speeds are below the turbine’s cut in speed (typically 7-10 mph), then the turbine will produce no power and all of the home’s energy needs will be met by the utility company. However, when wind speeds are above the turbine’s cut in speed, then the turbine generates power, lessening the amount drawn from the power grid. Any electricity produced which is above and beyond that needed for the home may be sold back to the local electricity supplier.

The typical wind turbine system owner sees a savings of around 50% on their electricity costs; depending on weather conditions and the home’s energy needs, this may be slightly more or less.

Wind systems are very sensitive to the average wind speed in the area, so if it were a concern, a turbine owner should have at least an average wind speed of 10 miles per hour and be paying at a lesser fee for electricity.

For most residential wind power systems, the charge of taking wind measurements is not warranted to predict wind turbine performance. However, in some mountainous areas, it may be best to score wind data before securing a system. If a person lives in a place that has sufficient breeze and wind patterns, then producing extra power from a residential wind turbine and supplying electricity to the grid will be fast and easy.

A residential wind system does not interfere with television signals or electronic communications and operates quietly. They’re also fairly easy to install, provided you have a small amount of technical skill; the average do-it-yourselfer can install a wind turbine system with ease. Your electricity supplier may install a second electrical meter to track the amount of electricity which you sell back to them.

Most wind turbine system dealers provide either complete ready-to-install applications or the option to buy directly from a store and let a would-be turbine owner do the installation instead. While the first option offers more customer support from the company, self-installation offers considerable savings and a technical understanding of the turbine. Soon-to-be owners can discuss the choices available with manufacturers to settle on which method best suits their financial accounts and skills.

Installing wind power generation at home also helps the environment. Wind turbines generate no pollution and by means of wind power, they can counterbalance tons of air pollutants and greenhouse gases which all cause climate change.

Want to find out how to build a wind turbine for your house and keep money on your hydro bill. Get a guide to building homemade wind generator and you can save thousands on the cost of purchasing one and still make lots of power.

An area that has adequate wind can simply have a wind-based energy system that enhances the energy provided by the local utility company. A residential wind turbine is a great alternative source in meeting energy requirements. It is often configured in combination with a photovoltaic system, as most of the parts required for wind power generation are also needed for solar power. Once ensconced on top of a tower, a wind turbine accumulates kinetic energy from the wind and transfers it to electricity attuned with a home’s electrical system.

The majority of homes which have a residential wind power system use power from the local utility company in addition to their wind turbines. The reason for this is that most wind turbines have a cut-in speed (usually 7 to ten mph). If the wind speed falls below this, then power must be drawn from the local grid. When the wind is moving faster than the cut-in speed, then the turbines begin supplying electricity to the home, reducing the need for electricity from the utility company. If you generate more power than you use, it can be fed back into the power grid - and your utility company will pay you for it!

The typical wind turbine system owner sees a savings of around 50% on their electricity costs; depending on weather conditions and the home’s energy needs, this may be slightly more or less.

The efficiency of a wind power system depends entirely on the average wind speeds in your region. If you live somewhere where the wind speeds average above 10 mph, then your home is an excellent candidate for a residential wind power system ad you should be able to save a significant amount on your energy bill.

You can easily find out your area’s average wind speeds to determine if a wind power system is like to work well for your home. If your area is a breezy one, you may find that you can generate much of your own electrical power by installing a residential wind turbine.

A residential wind system does not interfere with television signals or electronic communications and operates quietly. They’re also fairly easy to install, provided you have a small amount of technical skill; the average do-it-yourselfer can install a wind turbine system with ease. Your electricity supplier may install a second electrical meter to track the amount of electricity which you sell back to them.

Complete, ready to install wind turbine systems are readily available, though homeowners can also choose to buy the necessary parts and install it themselves. Purchasing a ready to install system costs a bit more but comes with more comprehensive support if needed. Installing a wind turbine on one’s own requires a little more technical know-how, but also a significant savings over a ready to install system. People interested in a residential wind power system should look into the pros and cons of each option for themselves to choose which is best for their needs.

Installing wind power generation at home also helps the environment. Wind turbines generate no pollution and by means of wind power, they can counterbalance tons of air pollutants and greenhouse gases which all cause climate change.

See how to build a wind turbine for your house and keep money on your electric bill. Get a guide to building homemade wind generator and you can save 1000s on of purchasing one and still make lots of power.

In 2000, a major environmental disaster occurred which hardly made the headlines internationally and except for those involved in the gold recycling and refining business, it made little impression on the world outside of Romania where the incident occurred. During the night of January 30th, a dam gave way and flooded the valley below. The water brought with it well over 100,000 cubic meters of heavily contaminated water laden with 120 tons of cyanide delivered directly into the Romanian river network.

Where did all of this contamination come from? The dam waters were utilized by a gold refining plant which took gold bearing ore and extracted the precious metal from it. Many people are completely unaware that the gold refining process requires such environmentally damaging agents to obtain the metal but sodium cyanide is one of the most popular and lethal substances used to extract gold from gold ore.

In addition to sodium cyanide, other reagents are used including large quantities of zinc which then requires sulfuric acid to clean that out of the solution before the gold (and silver) can finally be removed for smelting.

Zinc is highly toxic and sulfuric acid is responsible for the deaths of many European forests due to acid rain in which sulfuric acid is the key active component. The final gold and silver sludge which is created is smelted into metal ingots which are very pure - 99.9999% pure. This requires huge amounts of energy to achieve further increasing the carbon footprint and environmental impact of gold and silver processing. Now let’s contrast extraction of the precious metal from base ore with recycling gold and silver.

Extraction of pure metal from existing gold bearing materials, usually jewelry but also other components such as computer components, results in a huge environmental saving. There is very little use of highly toxic materials and those which are utilized are done so in highly contained and safe locations. There is a huge difference between a gold ore operation using an open pit filled with sulfuric acid and a factory process which is recycles the sulfuric acid it is using for reuse over and over. In addition, there is a much reduced use of toxic extraction processes as the gold and silver metals are already in a highly purified state and are simply encased in a different form such as a ring or as a component on a computer motherboard.

Energy levels required to smelt existing gold and silver back into an ingot for reuse is also greatly reduced. Huge amounts of energy are required to further refine and separate gold and silver from the “sludge” created by ore extraction but existing gold and silver jewelry simply needs to be melted to be reformed into ingots.

Recycling gold and silver is very cost effective in financial terms but the environmental impact is greatly reduced and it is far more efficient and beneficial to recycle gold rather than extract it from the base ore. This in turn allows relatively high prices to be paid for second-hand jewelry especially in the current climate where gold and silver are in demand.

The best online resource to sell gold or sell platinum can be found at http://www.refinity.com

Taking the steps toward living a greener lifestyle is both a very rewarding experience and a difficult one. It’s not easy to make drastic changes to your lifestyle, from the type of food that you buy to the clothes that you put on your back. It can be especially difficult when so many examples of eco-friendly clothing do not look attractive. That’s why finding eco clothing for the fashion conscious can be an important step toward living a better lifestyle.

Most clothing is typically made from a number of different types of material. Therefore, you should be able to start making decisions which influence the type of material which is being used in your clothing. Choosing materials which are more sustainable and use less resources can be one way to start being more environmentally friendly without sacrificing your personal style.

Materials of an organic nature are the best ones to include in your wardrobe choices. These natural pieces of clothing, along with items which are being recycled, will help to ensure that you are making choices which are ecologically friendly as possible. You can wear your clothes without worrying that you are using too many natural resources to make them.

As you start to make smarter purchases of an environmentally friendly nature, the world of fashion will begin to take notice. This will encourage these fashion designers to start making clothing which is more green and this wave will spread through the entire world of fashion. While some designers are already taking steps to be more green, only when there is truly a demand will changes be made.

Eco clothing does not mean that one is going to be wearing boring, ugly clothing. Outfits made of natural and recycled materials can still come in many different forms and feature bright, vibrant colors. Making sacrifices for a green lifestyle does not have to affect your personality and sense of taste in clothing. It only means that you will need to be a little bit more careful when you start to make choices based on where and what you are buying.

Adding personal touches and pieces of flair will only make your green clothes even more special. Old buttons can be sewn onto pieces of clothing in addition to patches or old scraps. Making these clothes uniquely your own will add to the special feeling that they give you and make you more inclined to wear them often.

It is very important for green clothing to be animal cruelty free as well. Leather should not go into green clothing or any pieces which are made at the expense of animals. Sustaining the environment does no good if we are killing all of the wildlife which live within it.

The choice to start living in a more sustainable way is a noble one. You should find eco clothing for the fashion conscious, however, to ensure that you are not sacrificing your personal taste when making this lifestyle change. Looking good and treating the Earth well are not two things which are mutually exclusive.

Everyone can do his or her part to start an Eco Living revolution. Start shopping for Eco Clothing to go green for you and your family.

Everyone knows the bad news about the economy and our shrinking supply of oil. As a result, a lot of people began searching for alternative energy solutions. An entire new industry has popped up in the homemade solar panels sector. So why the buzz about these homemade solar power systems? For one, they reduce the dependency on oil. But what makes them so popular is that people can build their own solar power system cheap, I mean under $200 cheap! These homemade solar power systems use solar panels to charge a battery bank. The battery bank can power everything in your home, even during the night.

Who in the entire world does not wish to have their energy bills reduced by 80% or more? Many of us would jump at the chance to take advantage of such a great deal. You can make your own homemade solar panels and install a system for less than $200. Earth4Energy sells a step by step guide that shows you how to do it.

The guide has: easy to follow step by step instructions, a parts list of things to buy that you can find at your local hardware store, a separate section for constructing a wind power generator to save even more money off your monthly power bill, and a no risk 60 day money back guarantee.

There are also detailed instructions explained by videos.

Think about it. Here you are with a homemade solar panels system, generating power that will be stored in deep cell batteries for future consumption. And all of this costs just pennies on the dollar! The DIY instructional manual and videos are easy to understand so that even a beginner will be able to understand and follow.

I am proud to say that I have my own homemade solar power system in place. When I tell my friends that I built it, the first thing they ask me is if I can build them one and they will pay me for it. I could start my own homemade solar power business and I just might do that in the future. Of course I do not tell them about the easy guide I bought, I would rather have them think I am a genius.

Crabgrass can be a real killer and it can be a real pain in the neck. No matter how much you try to keep your garden or your lawn in the best shape that can be achieved because of your tender loving care, crabgrass still finds a way there. And that is why you believe that there may be something wrong with what you are doing. Or maybe there is something wrong with your lawn and you just have not found what it is.

Arm yourself with all the knowledge that you can gather regarding crabgrass. This is definitely the best thing to do before you go and attack it. You may attack the weed and that action just may only worsen the otherwise bad situation and that is something that you most definitely will not like. Think of doctors. They just do not operate because the situation is bad. They operate because they know how to and they know what they are dealing with.

Crabgrass really stands out if it grows in your lawn or your garden. And you will know that you are looking at it. If you are looking at something that looks like orchard grass, then you are definitely looking at crabgrass. And you will also notice that such are growing in patches. Now with that, it is a positive yes that your lawn has got a crabgrass problem. The patches are the ones that makes crabgrass a not so welcome guest to your lawn or garden.

When do they appear? This is something that you should also know so you that you would be aware and that you would know just when to expect them. Well, crabgrass is a grass that grows best during the summer season. It is known to be an annual weed so that is the time when they grow their very best (much to your chagrin). Thus, expect them to be at the top of their game during the months of July and August.

If you are on your way towards battling crabgrass (which is definitely the reason why you are going through this article), then you should also know how to treat your lawn when it is experiencing a bout of crabgrass. One of the most popular ways of attacking such a weed is by pulling them out but that just leaves brown spots on your lawn and that does not look nice. You can try to use pre-emergent herbicide before the crabgrass seeds actually start to grow. That way, you can stop them from taking over your garden.

When you start seeing that weed which has a single shoot, then you should expect a lot more of that. Crabgrass will have side branches. Each of these branches extends outward. At first glance, you would say that the weed looks like a star of some sort. But that is where the beauty ends - you know just how your lawn looks like with patches of them growing about and that does not really look nice.

Home Made Energy is a ebook which attempts to instruct the subscriber how to reduce the ever increasing power bills that haunt us all in this increasingly power hungry world. This book is a manual that instructs the subscriber how to build his or her very own home made solar powered electric generator or wind powered electric generator.

Solar engineerings require little to no maintenance and wind and water turbines require only regular oiling for peak performance. There’s no best time to make your green energy home and start living your dreams in green.

Bill Ford is a 52-year-old man from CA with a vision. Sick of expending good money on the high price of energy bills along with millions of others, he created HomeMadeEnergy.org.

HomeMade Energy is an content about how to construct your very own energy saving devices. These devices will assist you go green and save some green while you’re at it.

Anybody who’s looked into one of these content knows how simple some of them are. They provide very essential info and expect the subscriber to figure out the rest.

Wind energy is frequently the least expensive form of renewable energy — in fact, in a few cases it’s the cheapest form of any kinda energy. This, and the fact that it produces no emissions of any kind and no dangerous waste, make wind energy a very promising alternative for new power generation.

HomeMadeEnergy.org will instruct you everything you need to have your own solar or wind power system for $200 or even less and provides deep step-by-step information on how to construct your own renewable energy system. It covers solar and wind as the 2 main power sources for home made energy and shows you how to use them best in your geographical location. Home made energy is a good way to save 100s of bucks a month, and you will also be doing your bit for the environment!

There are many benefits to recycling gold. You can sell gold jewelry that is just sitting around collecting dust and make some money. Recycling gold is also good for the environment. Recycled gold is melted down to liquid form and then molded into a new product or piece of jewelry. Gold prices are at a all time high so you will be surprised at what you can get for the old pieces of jewelry that you have been saving.

The demand for metals is increasing at a faster rate than the mining industry can supply. Recycling of gold and other precious metals helps fill the gap between the growing demands and decreasing supply. When you recycle you also help save the environment by the not depleting more of our natural resources.

When they mine for gold it waste a lot of water; not only does it take an enormous amount of water it also contaminates the water sources it draws from. The majority of gold that is mined in the United States comes from Nevada. The Nevada Gold Mines consume more water every year than all of the population of Nevada combined. One gold mine can consume 100 million gallons of water every day. The harsh chemicals that are use to refine the ore further pollute the ground and destroy local ecosystems.

The mining process that is used to extract the ore from the surrounding rocks amount to a huge amount of waste; a large part of it is in the form of discarded rock that is saturated with chemicals and solvents. This means for every ton of pure gold that exists there is three million tons of waste to dispose of. Eventually the chemicals and solvents in the discarded rocks will find their way into our ecosystem. This in turn will affect native plant life and the animals in the area of the mines.

The end goal of any mining company is to process as much gold as possible and this means that the more they mine the further underground they have to go. This makes mining a determent to our natural resources. The profit is huge for gold so the mining companies use the last technologies and processes to get as much gold as quickly as possible. Even though they are mining more efficiently they are still depleting our natural resources. This is why recycling everything and anything we can, including precious metals is becoming more important every day. You can help to do your part for the environment by recycling you precious metals and looking for jewelry that is made with recycled metals. You can clean out your jewelry box and get rid of things you never wear and it will give you more space. You can always take the money from the gold you sell and purchase a piece of jewelry you have had your eye on. Gold recycling is a easy and fast way to recycle your unwanted gold jewelry and make some money at the same time.

Can it be that a DIY solar system was created by a man who pulled an old TV lens from the trash?

In a stunning show of intellect, a writer for Worldsnest, tapped an unlikely source to create a homemade energy system: the garbage can. He has created a 6 kwh solar power system for about $6,000. A comparable 6 kwh solar power system done with PV panels and a professional installer costs about $60,000.

After 20 years of the U.S. Department of Energy funneling tax paying dollars to big oil companies like Exxon and Chevron, neither of them could come up with a solution as cheap and as powerful as this. What a scam! The U.S. Department of Energy and big oil do not want this kind of solution to hit mainstream America because they can not make money off of it. The U.S. Department of Energy wants to be able to tax a solution, while big oil wants to keep you as a dependent customer. They can not stand a solution that involves you producing your own energy from the sun.

Big oil and their lobbyists that buy Congressmen will not let a DIY homemade solution reach mainstream America. They will not and can not allow you to create your own electricity completely free.

The truth gets much darker than this. The oil trade is killing average people in Nigeria, Burma, and other countries. Nigeria and Burma are just two countries in which big oil has brought great harm and death to average people. Big oil is telling the Nigerian government where they want their luxury houses to be built. The government is sending in bulldozers to remove entire neighborhoods of poor people. They are even destroying churches. You can find videos of what is happening in Nigeria courtesy of YouTube.

Nigeria is only a portion of the cruelty to people in the name of profits for big oil. The U.N. Security Council has condemned the Burmese military junta for its treatment of its people. All companies have left the region except for Chevron. While the pipe line was being built, supervised by oil executives, the Burmese military junta forced villagers along the pipeline into slavery. Here are a Burmese citizens own words, “When there was no pipeline, there were no problems with soldiers. No soldiers came to this area. The soldiers came when we were harvesting rice. After the pipeline reached our village, we were told we had to work for the white people at gun point. We were forced by the soldiers into slavery. If we said we had to plant rice and would not do work for the white people, they said they would kill us and all our children. Because of the white people, our home was destroyed and the men had to run into the jungle or be killed. Many were killed. My husband escaped into the jungle. I waited for him to come back. While I was waiting, a soldier walked up to me and hit me with his rifle. I hit my head on a stone when I fell and lost consciousness. When I awoke, my baby had been burned alive in a fire. She did not cry. Her body was burned and all black.”

So this ordinary American created a DIY homemade solar system that could end our huge dependency on oil. The U.S. Department of Energy has given big oil millions of dollars in so called “research grants” for alternative energy development. Notice that no one has produced a solution as good and as cheap as this ordinary American in the video below. Has the U.S. Department of Energy been running a scam on tax payers that has benefited big oil for all these years? I think it is a valid question after we see what a man with no research budget whatsoever has come up with and even used parts from the trash to build it.

If you think Im making all this up, watch the video below and decide for yourself.