A home made solar cell can work to help with powering a small electrical item you can use outdoors. A good process is going to be needed to get this to work. Fortunately you can get a cell made with simple items like a jar and water plus copper sheets. Here is a process to use to make home made solar cells on your own.

First you will need to use the right base material for the task. A copper sheet will be needed. This is because the copper is going to be used to help with receiving the energy that will be created. Silicon is generally used in professionally made solar cells. However that material is something that is very difficult to get on the market. Copper will be your best option.

When working with your copper sheet it will need to be cut into a square shape. An ideal size will be between six to eight inches. After cutting this material you will have to wash your hands. This is so that any materials you got on them when cutting will not impact the sheet. If these materials impact the copper then the solar cell will not work as well.

Grease can be present on some copper sheets when making a cell. You will need to wash it off. You should then use an emery cloth for sanding down the cell. After this works the sheet will have to be heated. You will get a cuprous oxide layer created as a result of this.

After this is done you can find a black cuprous oxide layer covering atop the copper surface. This should be able to be removed properly after it has cooled off. After this is removed you will see a rust colored layer. This layer is used to help with getting the energy that is collected to be stored. You will need to use the cuprous oxide along with the regular copper layer later on.

The copper will then need to be added onto the jar. The copper can be easily curved along the jar at a good angle. After this is done you can work with the cuprous oxide. This works in that it will help with getting sunlight to work.

After this part you will have to use alligator clips. One clip each will go on the copper and cuprous oxide plates. The copper clip will have to be put on a terminal that produces positive energy. The cuprous oxide clip will work for the negative terminal. When this is used the energy that can be produced will work.

The last step involves pouring water into the jar. This jar should be one that is mixed along with salt. After this you can place your finished product in the sun. It will start to produce energy at this point.

It is easy to work on creating a solar cell at your own home. You can use this process to create a cell that can power small home items. It is one that you will be able to use for your own needs.

With the price growths for power never ending, we should all look at buying home made solar cells. Yes, they are a bit pricey, but that does not mean that you cannot start with one home made solar cell and work your way up from there.